What is Access Point? How to configure it?

Access Point can be defined as a device that is used as a wireless hotspot. A Router or a Modem can be called as an Access Point. In simple words, a device that helps you to connect to a wireless network is called as an Access point.






Access Point can be configured in 2 ways.
    1.   If the Access Point is a Router or a Modem, You need to configure it along with the internet settings of the router/modem. Generally the Internet Service Provider (ISP)'s settings are not necessary to configure an Access Point. The settings you need are the SSID (Name of the Wireless Network), Wireless Channel and the Wireless Security. Click here to know more about wireless settings and here to know about Wireless Security.




    2.   If the Router or the Modem you using doen not have wireless functionality in it, than you can connect the Access Point with a cable to the router/modem, configure the wireless settings and start broadcasting.




To use the Access Point as a Repeater, view this post.


Lets see about the Cisco WAP200E Access Point. 


WAP200E is a popular for its stability and good consistent performance. If you happen to face any issues with WAP200E, you don't need to reconfigure all the settings. Rather just turn off the device, wait for 5 seconds and turn it back on. It will Work absolutely fine. Weather-resistant housing allows for outdoor deployments, and Power over Ethernet (PoE) functionality frees the device from proximity to an electrical outlet. You don't need to connect this device to any power outlet. Its RangeBooster technology reaches up to twice as far as standard 802.11g, with reduced dead spots and improved throughput up to 35 percent.

http://linksys-wireless-help.blogspot.com

Router Recover from a bad flash or Dead like wrt54g, wrt54gl ...

Recover back your Routers like wrt54g, wrt54gl and many other Router
So, you're afraid you've bricked your router. Don't worry, there are a number of things you can try to get your router working again before giving up and living with the fact that your router is now a paperweight.

It is also unfortunately possible to configure your router in ways which make it dead to the world. These techniques may be useful in these cases also.

Before you continue below, make sure you've first tried a hard reset to revive your router:




1.Disconnect the router from UTP cables (not the power cable).

2.Push reset button for 30 secs.

3.Without releasing reset button, disconnect power cord.

4.Hold the reset button for another 30 secs.

5.Replug the power cord.

6.Still hold the reset button for another 30 secs.

7.Release the reset button and give the router about 10 secs to resettle.

8.Disconnect power cord for another 10 secs and then reconnect.

9.All should be in default settings now.

This procedure is usually called 30/30/30 reset.



If the power light blinks in a neverending way, the 30/30/30 reset has no effect. Go to the Windows section of this page to see the reset-from-scratch procedure

For more help in detail  visit my other blog  and  http://www.dd-wrt.com/wiki/index.php/Recover_from_a_Bad_Flash