How do I Retreive my LinkSys Router Password?

I lost the paperwork with my LinkSys router password. I desperately searched but could not find it. Everyone kept telling me that I could not retrieve my Linksys router password but would have to reset the router. I was sure there should be a way to retrieve my Linksys router password. So I very determinedly set out to find the secret to retrieve my linkSys router password. What did I find after looking all over the internet? There is only one thing to do once you have lost a LinkSys router password. You have to reset the router. Before doing anything it is a good idea to record what the settings are for the router. Then it is time to set the LinkSys router password back to its default one.

Designed for consumers, the improved zBoost SOHO YX545 cell phone signal booster extends a Cell Zone for multiple users and ALL devices operating on 800 and 1900 MHz frequency bands except those using Nextel/iDEN, 4G or 2100MHz. The new zBoost SOHO improves coverage by 20 percent over the zBoost YX510 and boosts signal up to 3000 square feet, making it perfect for your home or office. The package includes everything you need: zBoost amplifier base unit, base unit antenna, power supply, coaxial cable (RG59-mini), signal antenna and mounting hardware. The wide radio wave beam width directional antenna receives signals from multiple cell towers.

Price: Click here to buy from Amazon

Apparently there is this little hole, a pinhole, on the back of the router. It should indicate that it is the reset button. Take a paperclip or pen tip and put it into the hole. You need to press down for several seconds, about 30 seconds works. If you do it right then the lights on the front will go on and off showing that it is reset. Pushing the reset button puts the router back to the factory default settings. This is called a hard reset.

That seems easy enough. However that is not the end of it. You have to log onto the router and reconfigure it. There are some very simple steps to follow to do this. First make sure a computer is connected to the router. Use one of the Ethernet ports. Then turn on the computer. Let the web browser load up. The enter URL http://192.168.1.1/. A popup box should show up. It will request that you enter a username and password to login to your router. The default password is in the routers owner's manual. Which does you no good if you don't have any idea where the owner's manual is.

Without the owner's manual there is still the chance to reset the router. Some of the older LinkSys routers default username is blank, not the word blank but actually nothing. The default username for BEFW11S4, WRT54G is admin. For EtherFast Cable/DSL Ethernet routers default username is Administrator. Comcast routers default username is comcast. The default password for BEFW11S4 is nothing or blank. Older models of LinkSys routers default username is blank, or nothing, not the word. With the newer models it is admin. Comcast routers default password is 1234. After you get past the login screen you will be able to easily reconfigure the LinkSys router.